© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.
The following are the possible status messages for Inventory devices. These can be read via script and/or QSysControl Named Controls.
OK – Green – (0) – Audio is good, hardware is good.
Compromised – Orange – (1) – Audio is good but a redundancy mechanism is active (one LAN down but the other is still up) or a non-fatal hardware problem exists (fans too slow, temperature higher than expected, etc.)
Fault – Red – (2) – Audio is not passing, or hardware is malfunctioning or mis-configured (amplifier power off, audio streams broken, wrong type of I/O Card installed, loudspeaker short circuit, etc.)
Not Present – Gray – (3)A virtual component in the design, that is designated as Dynamically Paired, and Not Required ,has no hardware assigned to it.
Missing – Red – (4) – A piece of hardware, defined in the design, has not been discovered. Audio is not passing through that piece of hardware.
Initializing – Blue – (5) – In the process of firmware, configuration update, and design start. Audio is obviously bad.
© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.